ITP11 displays

The ITP11 is a universal, microprocessor-controlled display unit for monitoring telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejindustrial processes. The measured values are scalable. The ITP11 is designed to be connected to any transmitter with a 4-20 mA output. It requires no auxiliary power and is supplied directly from the measured current. Protection class: front IP65, rear IP20.

Technical specs
Parameter 
Supply currentfrom current loop
Input signal4 ... 20 mA (2-wire)
Number of inputs1
Measurement range3,8 ... 22,5 mA
Normal operation3,2 ... 25 mA
Max. voltage drop3,8 V
Precision0,2% + 1 digit
DisplayLED, 7-segment
Digit height14 mm
Display colorred or green
Number of digits4
Sampling rate (no attenuation)1 sample/s
IP protectionfront IP65, rear IP20
Dimensions48 x 26 x 65 mm
Massapprox. 30 g
Protection classIII
Workplace temperature-30 ...+70 °C
Storage temperature-40 ...+80 °C
Humidityup to 80% (non-condensing)
.
Display comparison
 ITP11ITP14ITP16SMI2
Input signal4 - 20 mA0 - 5 mA
0 - 20 mA
4 - 20 mA
0 - 10 V
2 - 10 V
RTD
Thermocouples
RS-485 Modbus RTU
Power supplysupplied by the measurement circuitexternal 24 V DCexternal 24 V DCexternal 12/24 V DC
Digital outputn/atransistortransistorn/a
Available versionsred
green
red
green
red
green
red

Specification (.pdf)

ITP11-x-W displays

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejITP11-x-W is a universal digital display unit for industrial uses. The display works with sensors and transmitters with output signal conforming with 4-20 mA standard. It requires no auxiliary power and is supplied directly from the measured current. The device’s enclosure is meant for mounting on a wall, a DIN rail and a tube with diamater up to 200 mm. The device is available in red (ITP11-R-W) and green (ITP11-G-W). Protection class: IP65.

Specification (.pdf)

ITP14 displays

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe ITP14 is a universally-applicable process display for monitoring and control of industrial processes. This display features a digital output and a configurable analog input. The NPN transistor output can control a load up to 42 V DC / 200 mA, which makes it possible to implement ON/OFF control. The input can be set either for voltage signals (0-10 V and others) or for current signals (4-20 mA and others). Protection class: front IP65, rear IP20.

Technical specs
ParameterSpecification
Power supply24 (10 ... 30) V DC
Max. power consumption1 W
Number of inputs1
Type of input0-5 mA, 0(4)-20 mA, 0(2)-10V
Sampling time0,3 s
Precision0,2% + 1 digit
Temperature influence≤ 0,2% / 10 °C
Input resistance0-5 mA, 0(4)-20 mA: ≤ 120 Ω
0(2)-10 V: ≥ 250 kΩ
Number of outputs1
Type of outputNPN transistor
Max. output load200 mA, 42 V DC
Symbol height14 mm
Dimensions48 x 26 x 65 mm
Weightapprox. 30 g
.
Display comparison
 ITP11ITP14ITP16SMI2
Input signal4 - 20 mA0 - 5 mA
0 - 20 mA
4 - 20 mA
0 - 10 V
2 - 10 V
RTD
Thermocouples
RS-485 Modbus RTU
Power supplysupplied by the measurement circuitexternal 24 V DCexternal 24 V DCexternal 12/24 V DC
Digital outputn/atransistortransistorn/a
Available versionsred
green
red
green
red
green
red

 

ITP15 displays

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe ITP15 Bar Graph Display is a compact panel-mount process indicator that is intended to visualize an analog input signal in the range from 0 to 100% with 10 bars 10% each. The input signal can be either a linear voltage signal of 0(2)-10 V or a current signal of 0(4)-20 mA. Along with indication, a simple on-off control can be implemented with the NPN transistor output of this bar graph panel meter. This output can control a load of up to 200 mA, 42 VDC. Protection class: front IP65, rear IP20.

Technical specs
Parameter 
Power supply24 (10 ... 30) V DC
Max. power consumption1 W
Inputs1
Input signal0-5 mA, 0(4)-20 mA, 0(2)-10V
Sampling time0,3 s
Input resistance0-5 mA, 0(4)-20 mA: ≤ 120 Ω
0(2)-10 V: ≥ 250 kΩ
Outputs1
Type of outputNPN transistor
Output loading capacity200 mA, 42 V DC
Display10 two-color LED bars
Bar colorsred, green
Resolution10%
IP codefront IP65, back IP20
Dimensions48 x 26 x 65 mm
Weightapprox. 30 g
.

 

ITP16 displays

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe ITP16 is a process display for monitoring temperature signals. This display features a digital output and a configurable analog input. The NPN transistor output can control a load up to 42 V DC / 200 mA, which makes it possible to implement ON/OFF control. The device can process linear voltage signals, signals from various RTDs (Pt100, Pt1000, and others) or thermocouples (K, J, and others). Protection class: front IP65, rear IP20.

Technical specs
ParameterSpecification
Power supply24 (10 ... 30) V DC
Max. power consumption1 W
Number of inputs1
Sensor typesRTD according to IEC 60751:2008
RTD according to GOST 6651
Thermocouples accorning to IEC 60584-1:2013
Thermocouples according to GOST 8.585
Thermocouples accoring to DIN 43710
Linear signals 0 ... 1 V, -50 - +50 mV
(more information in the manual)
Max. sampling time2 s
Precision0,25% of measurement range
Temperature influence≤ 0,2% / 10 °C
Input resistance0-1 V, -50 - +50 mV: ≥ 250 kΩ
Number of outputs1
Output typeNPN transistor
Max. output load200 mA, 42 V DC
Symbol height14 mm
Dimensions48 x 26 x 65 mm
Weightapprox. 30 g
.
Display comparison
 ITP11ITP14ITP16SMI2
Input signal4 - 20 mA0 - 5 mA
0 - 20 mA
4 - 20 mA
0 - 10 V
2 - 10 V
RTD
Thermocouples
RS-485 Modbus RTU
Power supplysupplied by the measurement circuitexternal 24 V DCexternal 24 V DCexternal 12/24 V DC
Digital outputn/atransistortransistorn/a
Available versionsred
green
red
green
red
green
red

 

SMI2 displays

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe SMI2 display is meant for industrial process monitoring with the use of Modbus protocol and RS485 interface. The device can fulfill the role of either Master or Slave, displaying integers, decimals and 4-symbol strings. Available in red or green. Protection class: front IP65, rear IP20.

Specification (.pdf).
Display comparison

 ITP11ITP14ITP16SMI2
Input signal4 - 20 mA0 - 5 mA
0 - 20 mA
4 - 20 mA
0 - 10 V
2 - 10 V
RTD
Thermocouples
RS-485 Modbus RTU
Power supplysupplied by the measurement circuitexternal 24 V DCexternal 24 V DCexternal 12/24 V DC
Digital outputn/atransistortransistorn/a
Available versionsred
green
red
green
red
green
red

 

Mx110 modules

The input and output modules of Mx110 series offer a flexible telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejsolution in distributed automation systems. The robust modules carry out on-site measured value acquisition and process control and are very suitable for extension of existing systems as well as for creating new high-performance systems. Due to the proven RS485 bus technology, the Mx110 modules can be used in different fields, such as building technology, process industry, etc. No bus coupler or power supply unit is required, like in other decentralized I/O systems.

 

 

Available configurations
VersionI/O config
MV110-24.8A8 analog inputs (RTD, thermocouple, 0(4)-20 mA, 0-1V)
MV110-24.8AS8 analog inputs (0(4)-20mA, 0-5mA, 0-10V), częstotliwość do 200Hz
MV110-24.16D16 digital inputs
MK110-24.8D.4R8 digital inputs, 4 digital outputs
MU110-24.8I8 analog outputs (4-20mA)
MU110-24.6U6 analog outputs (0-10V)
MU110-24.8R8 relay digital outputs
MU110-24.8K8 transistor digital outputs
MU110-24.16R16 relay digital outputs
MU110-24.16K16 transistor digitial outputs
.
Technical specs
Parameter 
Power supply24 (21...35) VDC
Max. power consumption6 W
Input signalsdigital 8/16, analog 8
Output signalsdigital 4/8/16, analog 6/8
Sampling time5±2% ms
Max. measurement error0,25%
Temperature drift0,12%
RS485 interfaceA(+), B(-) terminals
ProtocolsModbus RTU/ASCII, akYtec
Baud rate2,4...115,2 kBit/s
Data bits7, 8
Controleven, odd, none
Dimensions63 x 110 x 75 mm
Massok. 240 g
Materialplastic
Ambient temperature-20...+55°C
Storage temperature-25...+55°C
Humidityup to 80% (at +25°C, non-condensing)
IP protectionIP20

 

Mx210 modules

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe Ethernet I/O-Modules of the MX210 series are available in different variants depending on the combination of the number, type, and properties of their inputs and outputs. The MX210 series includes modules featuring high-frequency inputs of up to 100 kHz for high-speed counting. Each module of this series has two built-in Ethernet ports. This allows interconnection of these devices according to the daisy chain connection, which stands out by simplicity and scalability. The two Ethernet ports are bypass-capable, meaning that the data transfer is not interrupted even if one of the modules fails. Any MX210 extension module can simultaneously communicate with up to 4 TCP clients, which facilitates cabling and configuring of the control system.

 

 

Available configurations
VersionI/O configuration
MK210-3116 digital NPN inputs, 8 relay outputs
MK210-31212 digital NPN/PNP inputs, 4 relay outputs
MV210-20220 digital NPN/PNP inputs
MV210-20420 digital NPN inputs
MV210-21232 digital NPN/PNP inputs
MV210-21432 digital NPN inputs
MV210-22115 logical 230 V AC inputs
MU210-4018 relay outputs
MU210-40216 relay outputs
MU210-41016 transistor outputs
MV210-1018 analog inputs (RTD, TC, 0-20 mA, 4-20 mA, 0-1 V)
MU210-5018 analog outputs (0-20 mA, 4-20 mA, 0-1 V, 0-10 V)
.
Technical specs
ParameterSpecification
Power supply24 (21...35) VDC
Communication protocolModbus TCP
Communication interface2x Ethernet 10/100 Mbit
Configuration interfaceMicroUSB, Ethernet 10/100 Mbit
Dimensions42 x 124 x 83 mm
82 x 124 x 83 mm
Weightabout 400 g
Materialplastic
Ambient temperature-40...+55°C
Storage temperature-40...+55°C
Relative humidityup to 95% (non-condensing)
IP codeIP20

Product flyer (.pdf)

 

NPT3 temperature transmitter

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe NPT3 transmitters are designed to be mounted on a measuring insert in a Form B DIN connection head. The device converts the sensor signal from a thermocouple or RTD to a 4-20 mA standard signal. The configuration is performed via the USB interface. No programming adapter is required. The configuration software is included in the delivery.

 

 

Technical specs
ParameterDescription
Power supply24 (12...36) V DC
Analog inputs1
Analog outputs1
Output signal4-20 mA
Accuracy0,50% with thermocouple, 0,25% with RTD
Linearity error, max.±0.2%
Ambient temperature-40...+85 °C
IP codeIP 30
Dimensions-40...+85 °C
Weightapprox. 25 g
.
Supported sensors
SensorMeasuring range, °C
Pt50-200…+750
Pt100-200…+750
Pt500-200…+850
Pt1000-200…+850
Ni100-60…+180
J-200…+1200
N-200…+1300
K-200…+1300
S0…+1750
R0…+1750
B+200…+1800
T-200…+400

NPT4 temperature transmitter

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe NPT4 is a universal temperature transmitter in a 6-mm wide slimline DIN rail mounting enclosure. The device is intended for the conversion of the measurement signal from a TC or a 2-, 3-, or 4-wire RTD into a 4-20 mA or 0(2)-10 V standard signal. The temperature transmitter has an error detection in the event of a sensor break, and its input is protected against short circuit. The power supply circuit is protected against reverse polarity. A wide variety of RTDs and TCs are supported. The NPT4 is configured via a USB interface.

 

 

Technical specs
ParameterSpecification
Power supply24 (10...36) V DC
Power consumption max.1,5 W
Galvanic isolation1500 V
InterfacemicroUSB (USB2.0 Full Speed)
Analog inputs1
Analog outputs1
Output signals0-5 mA, 0(4)-20 mA, 0-5 V, 0(2)-10 V
DAC resolution12 bit
Accuracy0,50% for TC, 0,25% for RTD
ADC resolution15 bit
Ambient temperature-40...+70 °C
IP codeIP20
Dimensions6,1 x 113 x 115 mm
Weightok. 200 g
.
Supported sensors
SensorMeasuring range, °C
Pt50-200…+850
Pt100-200…+850
50P-200…+850
50M-180...+200
Cu50-50...+200
100P-200…+850
100M-180...+200
Cu100-50...+200
Ni100-60…+180
J-200…+1200
N-200…+1300
K-200…+1300
S0…+1750
R0…+1750
B+200…+1800
A0...+2500
T-200…+400
L-200...+900

 

DTS125L temperature sensor

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe DTS125L is a temperature sensor for measuring the air temperature for outdoor or indoor areas. The housing is made for wall mounting. The protection degree of IP65 enables to use the sensor in warehouses and manufacturing facilities with high installation demands to dust and water protection.

 

 

Technical specs
ParameterDescription
Sensor typePt100, Pt1000
Wiring2-wire, 3-wire, 4-wire
Measuring range-50...+100 °C
Accuracy classB
Response time, max.10 s
Insulation resistance, min.20 Mohm
IP codeIP65
Protective tubeAISI 321
Probe length60, 80, 100 mm

Specification (.pdf)

PVT10 humidity and temperature transmitter

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe Humidity and temperature transmitter PVT10 is intended for measurement of relative humidity, temperature and dew point value of air ensuring high accuracy and stability. The transmitter is designed for indoor use. Compact wall-mount plastic enclosure provides natural sensor ventilation. The RS485 interface supporting standard Modbus RTU protocol enables direct fieldbus networking of up to 240 devices. Analog outputs, configurable as 0-10 V or 4-20 mA, may be used to connect the transmitter to secondary devices like display panels or controllers.

 

Technical specs
ParameterDescription
General
SensorsRH and T sensors
Measurement ranges0...95% RH / -20...+70 °C
Resolution0.1% RH / 0.1 °C
Accuracy±3% for RH = 20...80%
±4% for RH = 5...20% or 80...95%
±0.5% for T = -20...+70 °C
Response timeapprox. 15 s
Self-diagnosticsfull functionality check at start-up
Warm-up time, max.1 s
Power supply12 / 24 (11...30) V DC
Power consumption, max.1.5 W
Communication
InterfaceRS485
ProtocolModbus RTU
Baud rate1.2...57.6 kBit/s
Galvanic isolationnone
Outputs
Analog outputs2
Output signal (configurable)4-20 mA / 0-10 V
Environment
Ambient temperature-20...+70 °C
Humidityup to 95%, non-condensing
IP CodeIP20
Operating environmentindustrial indoor places
Enclosure
Dimensions71 x 71 x 27 mm
Mountingwall mount
Materialwhite ABS

PVT100 humidity and temperature transmitter

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe transmitter is intended for measurement of relative humidity, temperature and dew point value in air and non-aggressive gases ensuring high accuracy and stability. PVT100 features two freely configurable analog outputs, RS485 Modbus RTU interface for direct fieldbus networking and a range of built-in or remote probe for various applications.

 

 

 

Technical specs
ParameterDescription
General
Sensorscombined RH and T sensors
Measurement ranges0...100% RH / -40...+80(120) °C
Resolution0.1% RH / 0.1 °C
Accuracy±2.5% RH/±0.5% °C for RH = 20...80%
±3.5% RH/±0.5% °C for RH = 5...20% or 80...95%
Response timeapprox. 15 s
Self-diagnosticsfull functionality check at start-up
Warm-up time, max.1 s
Power supply12 / 24 (11...30) V DC
Power consumption, max.1.5 W
Communication
InterfaceRS485
ProtocolModbus RTU
Baud rate1.2...57.6 kBit/s
Galvanic isolationnone
Outputs
Analog outputs2
Output signal (configurable)4-20 mA / 0-10 V
Permissible load< (Us – 10.5 V) / 22 mA for 4-20 mA
> 250 kohm for 0-10 V
Cable connectionsscrewless terminal blocks
Probe connectorM12, IP68
Environment
Ambient temperature-40...+85 °C
Humidityup to 100%, non-condensing
IP CodeIP65
Operating environmentindustrial indoor and outdoor places
Enclosure
Dimensions80 x 82 x 55 mm
Mountingwall mount
Materialgrey ABS
.
Variants
Variant
PVT100-DM12 / 24 V DC + RS485 + 2 analog outputs + 0...100% RH / -40...+80 °C
PVT100-WM12 / 24 V DC + RS485 + 2 analog outputs + 0...100% RH / -40...+80 °C
PVT100-RP-212 / 24 V DC + RS485 + 2 analog outputs + remote probe (2.5 m cable) + 0...100% RH / -40...+80 °C
PVT100-RP-512 / 24 V DC + RS485 + 2 analog outputs + remote probe (5 m cable) + 0...100% RH / -40...+80 °C
PVT100-RP-T212 / 24 V DC + RS485 + 2 analog outputs + remote probe (2.5 m cable) + 0...100% RH / -40...+120 °C
PVT100-RP-T512 / 24 V DC + RS485 + 2 analog outputs + remote probe (5 m cable) + 0...100% RH / -40...+120 °C
.

IC4 converter

telemetria i sterowanie
automatyka przemysłowa
dystrybucją urządzeń automatyki przemysłowej
integracja systemów automatyki przemysłowej
realizacja projektów automatyki przemysłowej
dostawa i montaż automatyki przemysłowejThe IC4 is a USB-RS485 converter. Both interfaces have been galvanically isolated. The device is powered directly from a USB port and can be mounted on a DIN rail.

Specification (.pdf)